Plastic Pallet Flow Specifications
Concentric manufactures pallet flow with a variety of plastic wheel designs to transport any type load and make any pallet flow. Wheels with bearings are available in standard design or with a sealed bearing which can help maintain pallet flow in dusty or contaminated warehouse environments. A bearingless pallet flow wheel with a capacity of up to 580 lbs. per wheel provides excellent product flow and an additional cost-effective plastic wheel option in pallet flow lanes.
This bearingless wheel is designed as a complementary speed control device and is impact resistant. It has a reinforced rib design that aids in a maximum capacity of 580 lbs per wheel. Ideal for wash down, dusty or contaminated environments as well as ambient or cooler environments.
Part Number: WL-287-BLWH-1.125
Standard Bearing Wheel
This high strength bearing wheel is designed for ambient and freezer environments. The reinforced rib design aids in a maximum capacity of 320 lbs per wheel.
Part Number: WL-287-BWH-1125
Sealed Bearing Wheel
This high strength bearing wheel contains a special lubricant and seal which makes it ideal for wash down, dusty or contaminated environments. The reinforced rib design aids in a maximum capacity of 320 lbs per wheel.
Part Number: WL-287-BWH-SEALED-1125
Pallet Flow Systems Product Specifications
|Bearingless Plastic Wheel
||Transit speed control, light flow applications, pick modules, wash-down environments, heavy impact areas.
||Load Capacity: 580 lbs. per wheel; diameter 2.87″, width 1.125″. Material: polycarbonate alloy; reinforced rib design; high strength and significant impact resistance.
|Bearing Plastic Wheel; Standard, Sealed
||Moderate to heavy flow applications including pick modules, FIFO, push back and empty return lanes.
||Load Capacity: 320 lbs. per wheel; diameter: 2.87″, width: 1.125″. Material: polycarbonate alloy; reinforced rib design, two bearings provide excellent rolling characteristics, sealed bearing where environment is a concern.
||High Impact Areas – Typically on the entry and/or exit end of Pallet Flow and Push Back Systems.
||Load Capacity: 320 lbs. per wheel; diameter 2.87″, width 1.125″. Material: Aluminum Design
||Pick modules, push back, wash-down and empty pallet return.
||Load Capacity: 225 lbs. per wheel; diameter 1.9″, width 1″. Material: specially developed low friction resin; wide surface provides superior flow over conventional steel skate wheels.
|Pick modules, push back, light flow applications and empty pallet return.
||Load Capacity: 125 lbs. per wheel; diameter 1.9″, width 1″. Material: polycarbonate alloy; reinforced rib design, two bearings and wide surface provide superior flow over conventional steel skate wheels.
|Plastic Wheel Track
||Used in moderate to heavy pallet flow applications for industrial production & distribution pallet storage environment.
||Wheel patterns can be designed inline or staggered on 2-, 3- or 4-inch centers, use the bearingless and bearing 2.78″ diameter plastic wheel.
||Ideal for pick systems, push back and empty pallet return. Light to moderate loads.
||Utilizes bearing and bearingless FreeWheeler™ wheels. Better flow and capacity because wider wheel width and 5/16″ axles when compared to steel skate wheels.
|Push Back Product Information | Case Study