Plastic Pallet Flow Specifications

Concentric manufactures pallet flow with a variety of plastic wheel designs to transport any type load and make any pallet flow.  Wheels with bearings are available in standard design or with a sealed bearing which can help maintain pallet flow in dusty or contaminated warehouse environments.  A bearingless pallet flow wheel with a capacity of up to 580 lbs. per wheel provides excellent product flow and an additional cost-effective plastic wheel option in pallet flow lanes.

 3standard_bearinglessBearingless Wheel

This bearingless wheel is designed as a complementary speed control device and is impact resistant. It has a reinforced rib design that aids in a maximum capacity of 580 lbs per wheel. Ideal for wash down, dusty or contaminated environments as well as ambient or cooler environments.
Part Number: WL-287-BLWH-1.125


 

3standard_bearingStandard Bearing Wheel

This high strength bearing wheel is designed for ambient and freezer environments. The reinforced rib design aids in a maximum capacity of 320 lbs per wheel.
Part Number: WL-287-BWH-1125

 


 

3sealed_bearingSealed Bearing Wheel

This high strength bearing wheel contains a special lubricant and seal which makes it ideal for wash down, dusty or contaminated environments. The reinforced rib design aids in a maximum capacity of 320 lbs per wheel.
Part Number: WL-287-BWH-SEALED-1125

 

 

Pallet Flow Systems Product Specifications

Item Application Characteristics
Bearingless Plastic Wheel Transit speed control, light flow applications, pick modules, wash-down environments, heavy impact areas. Load Capacity: 580 lbs. per wheel; diameter 2.87″, width 1.125″. Material: polycarbonate alloy; reinforced rib design; high strength and significant impact resistance.
Bearing Plastic Wheel; Standard, Sealed Moderate to heavy flow applications including pick modules, FIFO, push back and empty return lanes. Load Capacity: 320 lbs. per wheel; diameter: 2.87″, width: 1.125″. Material: polycarbonate alloy; reinforced rib design, two bearings provide excellent rolling characteristics, sealed bearing where environment is a concern.
Aluminum Wheel High Impact Areas – Typically on the entry and/or exit end of Pallet Flow and Push Back Systems. Load Capacity: 320 lbs. per wheel; diameter 2.87″, width 1.125″. Material: Aluminum Design
FreeWheeler™ Pick modules, push back, wash-down and empty pallet return. Load Capacity: 225 lbs. per wheel; diameter 1.9″, width 1″. Material: specially developed low friction resin; wide surface provides superior flow over conventional steel skate wheels.
FreeWheeler™
(Bearing Wheel)
Pick modules, push back, light flow applications and empty pallet return. Load Capacity: 125 lbs. per wheel; diameter 1.9″, width 1″. Material: polycarbonate alloy; reinforced rib design, two bearings and wide surface provide superior flow over conventional steel skate wheels.
Plastic Wheel Track Used in moderate to heavy pallet flow applications for industrial production & distribution pallet storage environment. Wheel patterns can be designed inline or staggered on 2-, 3- or 4-inch centers, use the bearingless and bearing 2.78″ diameter plastic wheel.
FreeWheeler™ Track Ideal for pick systems, push back and empty pallet return. Light to moderate loads. Utilizes bearing and bearingless FreeWheeler™ wheels. Better flow and capacity because wider wheel width and 5/16″ axles when compared to steel skate wheels.
Push Back Product Information | Case Study

Wheel Stops for Pallet Flow

Pallet flow from Concentric Storage Systems is tested from entry to full pallet stop. We offer a metal pallet stops that will keep pallets in their intended lanes and provide safe pallet flow. Each stop is coated to provide corrosion resistance and help identify the stop for drivers. Sturdy metal construction available in two different pallet flow stop designs can be tailored to your exact pallet load.
stop_pf1

 

7″ Red PF1 Stop

The 7″ Red PF1 Stop is made with a ramp design which helps alleviate the load line pressure and aids in load removal. It also has a high-lip tip to help eliminate the possibility of a pallet self-unloading. All stops have a protective coating which provides resistance from corrosion.

Part Number: ST-038-700-PF1


stop_widered

7″ Red Angle Stop

The 7″ Red Angle Stop is made with a ramp design which helps alleviate the load line pressure and aids in pallet load removal. It also has a high tip to help eliminate the possibility of a pallet self-unloading. All stops have a protective coating which provides resistance from corrosion.

Part Number: ST-038-700-WDANG